Where is it from?

Association locations map

Tags

Add your own tags:
Separate multiple tags using a comma

Similar items over time

Token - 1 Penny, T. Warburton, Iron & Zinc Spouting Works, Melbourne, Victoria, Australia, 1862 Numismatics Reg. No: NU 4476

Summary:
Australia Victoria Melbourne
T. Warburton Token Penny, 1862 (AD)
Mint: Thomas Stokes

Standard References: Andrews 598 = Heyde 262 = Sharples V.177
Other Details: Die combination B / Arms 6 see notes tab for details.
Description:
A copper trade token penny (32 mm diameter) featuring the name address and business of the issuer: T. Warburton, 11 Little Bourke St. West, Melbourne, Iron & Zinc Spouting Works. The reverse is from a Stokes stock die Arms 6 : Coat of arms consisting of a central shield set on grass covered ground and below Rising Sun. On left a kangaroo seated facing out but head back towards sun (sejant sinister reguardant) and on right emu with similar stance (passant dexter reguardant). Below ground line and set on bouquet of rose, thistles and shamrock, a ribbon with the motto ADVANCE VICTORIA. The shield is quartered by a cross with a star at the centre and at the end of each arm. The cross is not shaded. The quarters contain: top left, a three-masted sailing ship; top right, a golden fleece; bottom left, an anchor; and bottom right, a wheat sheaf. Around above, VICTORIA . 1862 around below in two lines, T. STOKES MAKER / 100 COLLINS ST. EAST MELBOURNE. The neck of the emu is poorly engraved with additional line to the left. Some original mint lustre on obverse.
Acquisition Information:
Transfer from National Gallery of Victoria (NGV), 1976
Discipline: Numismatics
Dimensions: 34 mm (Diameter)
Weight: 15.586 g (Weight)

More information

Tagged with: advance victoria, housing, iron zinc spouting, plumbing, urban development
Themes this item is part of: Thomas Warburton, Iron & Zinc Spouting Works, Melbourne, Victoria, Domestic & Community Life Collection, Numismatics & Philately Collection, Working Life & Trades Collection, Stokes & Son, Medal Makers, Melbourne, Victoria & Sydney, New South Wales, Alfred Chitty Collection
Primary Classification: TRADE TOKENS
Secondary Classification: Australia - Victoria
Tertiary Classification: working strikes
Series: Trade Tokens
DateEra: 1862 AD
Denomination: 1 Penny
Obverse Description: At centre within a line circle T. WARBURTON 11 LITTLE COLLINS ST. WEST around, IRON & ZINC SPOUTING WORKS : MELBOURNE :
Reverse Description: Coat of arms consisting of a central shield set on grass covered ground and below Rising Sun. On left a kangaroo seated facing out but head back towards sun (sejant sinister reguardant) and on right emu with similar stance (passant dexter reguardant). Below ground line and set on bouquet of rose, thistles and shamrock, a ribbon with the motto ADVANCE VICTORIA. The shield is quartered by a cross with a star at the centre and at the end of each arm. The cross is not shaded. The quarters contain: top left, a three-masted sailing ship; top right, a golden fleece; bottom left, an anchor; and bottom right, a wheat sheaf. Around above, VICTORIA . 1862 around below in two lines, T. STOKES MAKER / 100 COLLINS ST. EAST MELBOURNE. The neck of the emu is poorly engraved with additional line to the left, the T of EAST is below the letters AK of MAKER. The standard references for the die used to make this token are: Andrews 13 = Heyde Arms 5 = Sharples Arms 6.
Edge Description: Plain
Inscriptions: Obverse: T. WARBURTON 11 LITTLE COLLINS ST. WEST MELBOURNE IRON & ZINC SPOUTING WORKS
Reverse: VICTORIA . 1862 T. STOKES MAKER 100 COLLINS ST. EAST MELBOURNE.
Shape: round
Material: Copper
Issued By: Thomas Warburton - Iron & Zinc Spouting Works, Melbourne, Victoria, Australia, 1862
Mint: Stokes (Mint), Melbourne, Victoria, Australia, 1862
Previous Collection: Mr Alfred Chitty
References: Andrews 598 = Heyde 262 = Sharples V.177

T. Warburton advertised in the Melbourne Directory for 1862 as a galvanised iron spout maker. The same year he employed Stokes to strike a large order of penny tokens. Three obverse dies were needed to complete the order using Stokes stock reverse dies for the reverses. In all seven combinations of dies have been confirmed with an additional two reported by Andrews and repeated by Heyde (with the rider Not Seen) rejected by Sharples (JNAA.7.67-8).
Identification of the obverse die employed for a particular token can be made by following the steps:
1. If there is no stop after the abbreviation ST of BOURKE ST it is obverse C
2 If there is a stop and the word WEST is 11.0 mm long it is obverse B
3. If there is a stop and the word WEST is 11.8 mm long it is die A (this die cracked down the left side through the letters NC od ZINC through the W, T and B to the I of IRON if present this die crack is a clear identifier of obverse A.)
The museum storage and standard references are based on these die identifications.

The following die combinations with stock Stokes reverses (Numbered according to Sharples JNAA.7 pp. 5 -10) have been confirmed: A/Emu 1 (two weight standards), B/Sheaf 1, B/Arms 6, C/ Emu 1, C/Vine 1, C/Vine 2 and C/Sheaf 1
Bibliography:
  1. [Book], Dr Arthur Andrews, Australasian Tokens and Coins, Trustees of the Mitchell Library, Sydney, Sydney, 1921
  2. [Book], Dion Skinner - Renniks & Co Pty Ltd, Gilbert Heyde, Unofficial Coins of Colonial Australia and New Zealand, 1967
  3. [Article] Sharples, John P. 1993. A Catalogue of the Trade Tokens of Victoria 1848 to 1862. Journal of the Numismatic Association of Australia. vol.7: p.1-77.

Add your comment

  • Museum Victoria does not provide valuations, for more information please visit the valuation infosheet
  • Please note that Museum Victoria staff will not normally respond to comments posted on our website.
Yes No